JB Ecotex

Low BPA Dope-Dyed Black Polyester Fibre for Skin-Contact Applications

Low BPA Dope-Dyed Black Polyester Fibre for Skin

Your compliance team asks one question about black fabric that your colour team rarely hears. What is the BPA content of the fibre. J B Ecotex manufactures Black 6002, a low BPA dope-dyed black polyester fibre produced from 100 percent post-consumer PET bottles and engineered to hold Bisphenol A content below 1.0 ppm, with a test report available for every batch you buy.

Colour and chemistry are settled in the same bale. The pigment is locked into the polymer at the melt stage, and the BPA level is verified before dispatch. That combination sits inside our wider polyester staple fibre range and ships from our facility at Dhamdod, Surat.

Request Black 6002 samples and a BPA test report

Where BPA Enters a Recycled Black Fibre Programme

Bisphenol A is an industrial chemical used in certain plastics and resins. PET itself carries BPA only as trace contamination, which can arise in recycled streams when mixed plastic inputs enter during waste collection. The level that reaches your fibre therefore depends on how the feedstock is selected and how the polymer is processed.

Brands and retailers have responded by tightening Restricted Substance Lists and Manufacturing Restricted Substance Lists, particularly for babywear and skin-contact garments. BPA is recognised as a potential endocrine disruptor, and responsible buyers are reducing chemical traces in advance of regulation rather than in response to it.

Black is where this becomes awkward. Dark shades are often treated as a colour decision alone, so the chemical question arrives late, usually during a brand audit when your production is already running. Sourcing a verified low BPA fibre in black closes that gap at the raw material stage.

How We Hold BPA Below 1.0 ppm in Black 6002

Our low BPA grades are produced through controlled raw material selection and processing routes designed to minimise Bisphenol A presence. In Black 6002, melt-stage colouration and low BPA filtration run as part of the same production sequence, so the fibre leaves the line already black and already verified.

The controls behind a low Bisphenol A fibre programme work together rather than in isolation:

  • Feedstock selection that limits mixed plastic contamination entering the recycling stream
  • Advanced melt filtration applied during polymer processing
  • Polymer quality monitoring held to defined internal protocols
  • Batch-wise analytical verification before release
  • Third-party laboratory testing at accredited facilities, with documentation supplied on request

Every consignment can be traced from feedstock through to fibre dispatch, so the BPA figure on your certificate connects to a specific production lot rather than to a generic product claim.

What Black 6002 Delivers on Your Line

Chemical compliance carries little weight if the fibre runs badly, so Black 6002 is built to hold shade and stability through high-speed production. The pigment is embedded within the polymer body, which keeps colour uniform across the cross-section and keeps your machinery clean.

Here is what that looks like in practice:

  • Deep black tone with embedded pigment and consistent shade across batches
  • Excellent rubbing fastness and excellent light fastness
  • High process consistency under thermal load
  • Zero dye crocking and zero machine staining during processing
  • Compatibility with ring frame, vortex (MVS), open-end and air-jet spinning
  • Suitability for high-speed running and fine-count applications

Because colour is set at the polymer stage, your black programme skips the dyehouse entirely. Water use and dye effluent attached to the colouration step fall away, which is a useful secondary benefit for mills already reporting on discharge.

Built for Babywear, Innerwear and Next-to-Skin Black Fabric

A skin-safe recycled black polyester fibre earns that description through documentation rather than adjectives. Black 6002 carries OEKO-TEX Standard 100 Class I coverage alongside its verified BPA level, which is why buyers specify it for products where the fabric sits against skin for long periods.

Typical end uses include infantwear and kidswear, innerwear, bedding, uniforms and automotive interiors. Apparel programmes covering activewear and formalwear use it as well, along with home textiles such as curtains and upholstery and technical textiles including nonwovens, geotextiles and filtration layers. Across all of these, the reason for choosing it stays the same. The fibre answers the colour specification and the chemical specification with one product code.

Documentation Your Compliance Team Will Ask For

Procurement teams rarely accept a claim without paperwork behind it, so every element of this grade is evidenced. As an OEKO-TEX certified black rPET fibre, Black 6002 is supplied against Standard 100 Class I requirements for human ecological safety. It is GRS certified for recycled content with chain-of-custody traceability maintained throughout, and our operations are certified to ISO 14001 for environmental management.

BPA test documentation is issued per batch on request, which allows your compliance team to file evidence against each production lot rather than against the product range as a whole. Full grade-level detail across black, white and specialty variants sits on our recycled polyester staple fibre page.

Related Grades in the RPSF Range

Black 6002 is one grade within J B Ecotex’s full recycled polyester staple fibre range. If your application calls for a different colour, chemical or performance specification, the following grades may be relevant:

Black 6001 Dope-Dyed Black RPSF – Pigment locked in at the melt stage for a deep, uniform black that skips the dyehouse.

3002 Low BPA Super-White RPSF – For babywear and skin-contact programmes, with BPA below 1.0 ppm confirmed by lot-wise third-party testing.

Biyo with CiCLO® Technology – Recycled polyester staple fibre with CiCLO® technology for brands with microfibre shedding commitments.

RPSF for Spun Yarn – Grades set up for clean running on ring, open-end and vortex spinning lines.

View the full RPSF product range

Talk to a Low BPA Dope-Dyed Black rPET Manufacturer

Send us your denier, cut length, spinning system, monthly volume and the RSL threshold you are working to. We will come back with specifications, sample availability, BPA documentation and commercial terms. You can also review adjacent grades across our fibre range if your programme covers more than black.

Request a quotation

Questions Buyers Ask Before Ordering Low BPA Black Fibre

What is low BPA dope-dyed black polyester fibre?

It is black recycled polyester staple fibre coloured with pigment at the polymer melt stage and manufactured under controls that hold Bisphenol A content below 1.0 ppm. The shade and the chemical specification are both set during fibre production.

Is this a BPA-free black polyester staple fibre?

We describe Black 6002 as low BPA rather than BPA-free. The verified level sits below 1.0 ppm, confirmed by accredited third-party laboratory testing with documentation issued per batch. That measured figure is what your compliance team can file as evidence.

What is the BPA content of Black 6002?

Black 6002 is engineered to contain less than 1.0 ppm of Bisphenol A. Each production lot can be supported with third-party laboratory test documentation on request, allowing traceable compliance assurance against your Restricted Substance List thresholds.

Is this a babywear-compliant black polyester fibre?

Its low BPA content and OEKO-TEX Standard 100 Class I coverage make it suitable for baby clothing, kidswear, innerwear and other skin-contact applications. Confirm the fibre specification against your brand Restricted Substance List before qualifying it for a babywear programme.

Can I request a BPA test report for my batch?

Yes. J B Ecotex provides BPA test documentation for traceability and compliance assurance on request. Reports are tied to specific production lots, so the evidence you file corresponds to the consignment you received rather than to a general product claim.

Is your black rPET fibre OEKO-TEX certified?

Yes. Black 6002 is supplied under OEKO-TEX Standard 100 Class I for human ecological safety. It also holds GRS certification for verified recycled content with chain-of-custody traceability, and our manufacturing operations are certified to ISO 14001.

Which spinning systems can run this fibre?

Black 6002 processes on ring frame, vortex (MVS), open-end and air-jet spinning systems, including high-speed and fine-count applications. Embedded melt-stage pigment keeps dye crocking and machine staining away from your equipment during extended production runs.

How is low BPA black fibre different from standard black recycled fibre?

Standard black recycled fibre is specified on shade and fastness alone. This grade adds a verified chemical parameter, holding Bisphenol A below 1.0 ppm with batch-level test documentation, which makes it usable in skin-contact and infant categories.


Source Black Fibre Built for Your RSL Audit

Share the RSL threshold you work to and your monthly requirement, and our technical sales team will send the Black 6002 data sheet, a BPA test report and sample details.